DISCO5.CO.UK

General • RE: Si6 4 pot brembo bolt torque settings

JBFUK — Thu, 16 Apr 2026 21:06:17 GMT

Author: JBFUK
Posted: 16th Apr 2026 10:06 pm (GMT 1.00)

Ah yes you are right, 135 - that'll teach me to try to remember things

I'm not sure I got a full 60' in for second stage, bit tough due to clearance etc, but close enough and the last thing you want to do is go too far and snap one.

view forum post

General • RE: Si6 4 pot brembo bolt torque settings

Mole HD — Mon, 13 Apr 2026 17:03:01 GMT

Author: Mole HD
Posted: 13th Apr 2026 6:03 pm (GMT 1.00)

According to the dodgy workshop manual (in English) I downloaded from t'interwebs...which is probably the same one you have...

Caliper retaining bolts on the Brembo style calipers are 135nm + 60 °.

The manual (from browsing through it) only covers 2017/2018 models. It's more of a rough guide than anything else, decent value for the tenner I paid for it but not nearly as good as genuine Topix info.

...

view forum post

General • RE: Si6 4 pot brembo bolt torque settings

JBFUK — Sun, 12 Apr 2026 11:43:46 GMT

Author: JBFUK
Posted: 12th Apr 2026 12:43 pm (GMT 1.00)

I just serviced the 4-pots on my MY20 as they were not working properly. Turned out to be dirty/corroded pins preventing free movement of the pads.

Anyway. I replaced the caliper bolts when refitting and the workshop manual says 133nm / 98ftlb + 60'.

view forum post