- You are currently viewing DISCO5.CO.UK as a guest - Register to take part or Log In
-
- Rockcypher
- Member Since: 29 Apr 2017
- Location: CO
- Posts: 123
I put their 18’s on my td6 2017. See my post in the general section “33’s on 18 inch wheels”. As you are in the States also, give Lucky 8 a call, that’s who I bought my compomotives from.
2000 D2 (sold), 2004 D2 (sold), 2005 LR3 (Lives in CO), 2005 RR (sold), 2010 LR4 (sold), 2012 RR (sold), 2014 RR (sold), 2017 D5
-
-
- Rockcypher
- Member Since: 29 Apr 2017
- Location: CO
- Posts: 123
-
I’ve got their sliders on the way, come on UPS!
2000 D2 (sold), 2004 D2 (sold), 2005 LR3 (Lives in CO), 2005 RR (sold), 2010 LR4 (sold), 2012 RR (sold), 2014 RR (sold), 2017 D5
-
- jeb3
- Member Since: 23 Aug 2017
- Location: Monument, CO
- Posts: 33
-
Maybe we have different rear brake calipers. My initial contact was to Lucky 8 and they told me that most 2017 D5, specifically td6, had brake calipers that would not allow the Compomotive 18" to fit. they sent me a picture for the calipers that would fit and mine do not match. Just to make sure I contacted Compomotive directly and confirmed that they will not fit on my D5. Bummer, but I can work with 20". BTW, I used to live in PA but now am a Colorado resident. Just north of Colorado Springs.
Jim
-
- Rockcypher
- Member Since: 29 Apr 2017
- Location: CO
- Posts: 123
-
Who knows with LR? Mine is a 2017 Td6 HSE
2000 D2 (sold), 2004 D2 (sold), 2005 LR3 (Lives in CO), 2005 RR (sold), 2010 LR4 (sold), 2012 RR (sold), 2014 RR (sold), 2017 D5
-
- jeb3
- Member Since: 23 Aug 2017
- Location: Monument, CO
- Posts: 33
-
Lucky 8 referenced that, saying in 2017 they used different rear calipers for different models and for different locations but then they standardized later in 2017 to the same brakes now being used for MY18 and later. My vehicle was made earlier in 2017, that maybe the reason, even though we have very similar models, we have different rear brake calipers.
-
- DieselRanger
- Member Since: 12 Oct 2017
- Location: God's Country, Colorado
- Posts: 769
-
Mine is a 2017 HSE Td6 also, ordered from the factory and built in July 2017. Would love to know the measurement from axle center to caliper edge / guard plate on each of yours. I'll measure mine on Friday... currently traveling for work.
Jeb, I'm in Colorado Springs...we should meet up for a drive some time. Rockcypher - you in CB for the summer? Might be out that way at the end of June, though this year I doubt many high passes will be driveable even then.
-
- jeb3
- Member Since: 23 Aug 2017
- Location: Monument, CO
- Posts: 33
-
Once I have some good rubber, I would like to meet up and go off roading. Enjoyed going off road in Pennsylvania with the LR3, but have not done so with the D5 or in Colorado yet. Looking forward to it.
-
- jeb3
- Member Since: 23 Aug 2017
- Location: Monument, CO
- Posts: 33
-
Once I have some good rubber, I would like to meet up and go off roading. Enjoyed going off road in Pennsylvania with the LR3, but have not done so with the D5 or in Colorado yet. Looking forward to it.
-
- LancsLad
- Member Since: 22 Aug 2018
- Location: Lancs
- Posts: 147
At last!
Santorini Black MY 18 HSE Dynamic BLACK TDV6
-
- Mikmillar89
- Member Since: 01 Jul 2018
- Location: Stockport
- Posts: 27
-
They definitely fit an sdv6 3ltr 19my, they are super tight and you would have to be careful where you put the balancing weights. I’m going to try them with 30mm spacers just haven’t got round to it yet and mine are the 1880, the rear brakes are tighter than the fronts.
-
- You cannot create new threads in this forum
You cannot reply to threads in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT
DISCO5.CO.UK © 2016 - 2024 Futuranet Ltd
DISCO5.CO.UK is independent and not affiliated to Jaguar Land Rover.
