Discovery 2017

↓ Advertise on DISCO5.CO.UK ↓

  • nebc100
    Member Since: 08 Mar 2019
    Location: Altlinster
    Posts: 408
    Luxembourg 
    2018 Discovery Td6 HSE Lux Namib Orange

    Winch bumper

    Hello All,

    A few years ago I put a discreet winch on my D5.

    While I am very happy with it, the sad thing is that the radar sensor for the ACC didn't fit perfectly because my D5 is a 2017 model that used the old ACC radar sensor.

    This causes the ACC to sporadically stop working.

    I have seen that Rhino4x4 in AU do quite a nice looking from bumper for the D5 that has a winch tray built in.

    Has anyone on here tried it?

    If so, did you have problems getting it registered here?

    Thanks

    Nick
  • johnlad
    Member Since: 18 Feb 2021
    Location: Blackpool
    Posts: 28
    United Kingdom 

    I’ve the lucky 8 tray I had fitted on my 67plate D5 , the radar worked with that tray,
    Tray is available if you’re interested
  • nebc100
    Member Since: 08 Mar 2019
    Location: Altlinster
    Posts: 408
    Luxembourg 
    2018 Discovery Td6 HSE Lux Namib Orange

    Johnlad... Thanks for the offer... I might well be interested!!

    Do you know... which radar sensor did you have on your D5?

    Was it "in front" of the crash bar, or was it "set in" to the crash bar?

    You don't have any photos of the installation do you?

    I have the Wildbear winch tray... Really nicely made but sadly the acc mount is for the newer version of sensor, and mine is consequently slightly too high and fouls against the winch motor of I try to put it lower. This means that the sensor is half above the bumper, and sometimes gets 'confised'.

    Alternatively... Does anyone know of I can use a 2nd hand new sensor on my D5? Do they have to be coded to the car, or just calibrated?
  • johnlad
    Member Since: 18 Feb 2021
    Location: Blackpool
    Posts: 28
    United Kingdom 

    I’m almost certain it was the sticking out radar sensor, I’ll check through what photos I have and see if there’s any.
  • johnlad
    Member Since: 18 Feb 2021
    Location: Blackpool
    Posts: 28
    United Kingdom 

    I believe the sensor needs calibration to swap from another vehicle
  • Forum Permissions
  • You cannot create new threads in this forum
    You cannot reply to threads in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot vote in polls in this forum
All times are GMT DISCO5.CO.UK © 2016 - 2024 Futuranet Ltd DISCO5.CO.UK RSS Feed - All Forums 
DISCO5.CO.UK is independent and not affiliated to Jaguar Land Rover.
Switch to the mobile site