- You are currently viewing DISCO5.CO.UK as a guest - Register to take part or Log In
-
- Rockcypher
- Member Since: 29 Apr 2017
- Location: CO
- Posts: 123
TPMS Pairing?
Has anyone replaced a TPMS sensor? With going to 18inch wheels for summer driving (I kept my snow tires mounted on the 20" factory wheels), I purchased a new set of TPMS sensors for the new wheels. The tire installer told me the truck should recognize the new sensors, once I removed the winter set of wheels from the boot. Well the truck hasn't paired to the new sensors, and I haven't found any information in the owners manual.....Any help would be appreciated. Thanks.
2000 D2 (sold), 2004 D2 (sold), 2005 LR3 (Lives in CO), 2005 RR (sold), 2010 LR4 (sold), 2012 RR (sold), 2014 RR (sold), 2017 D5
-
-
- IndusD4
- Member Since: 28 Jan 2018
- Location: Sydney
- Posts: 698
From what I've read, the car will recognise the new sensors by just driving it. Not sure how far you'd have to drive though.
Ron
2016 D4 TDV6
IIDTool BT
-
- IndusD4
- Member Since: 28 Jan 2018
- Location: Sydney
- Posts: 698
-
I found
this PDF which on the 3rd page says to drive it for at least 10 minutes at over 18mph.
2016 D4 TDV6
IIDTool BT
-
- JonM
- Member Since: 30 Jun 2016
- Location: North Yorkshire
- Posts: 574
New sensors are shipped in an inactive, battery saving state. They need to be scanned with a TMPS tool to wake them up and then the car should automatically pair them when you set off driving.
Also check that you have the correct sensors. There are at least 2 different frequencies, the D5 uses 433Mhz.
MY2022 D5 HSE D300 - with extra nice bits added
MY2019 D5 HSE 3.0 SDV6 - sold to a dealer for a crazy price!
-
- You cannot create new threads in this forum
You cannot reply to threads in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT + 1 Hour
DISCO5.CO.UK © 2016 - 2024 Futuranet Ltd
DISCO5.CO.UK is independent and not affiliated to Jaguar Land Rover.
