Spot the difference (and an explanation would be good too!)
Spotted a slight difference on the front of my Discovery... following a new front bumper being replaced recently.
Not sure if these two components where the 'gap' is were replaced too, but I'm sure I never saw different sized "holes" either side before? The two parts left and right also look slightly different...
Is there anything wrong here, or anything to worry about?
MY23.5 D5 3.0 MHEV Metropolitan Edition – Santorini Black – Ebony Windsor Leather – 21” Style 5025 gloss black wheels – 21” full size spare tyre – Black roof rails – Black side mouldings - Williams Ceramic Coat. [Gone: D5 HSE @ 50,795miles: (now LH68 BYW)]
Looking at the pictures I think when its been rebuilt they have not cut the piece of panel on the right . I believe the small piece should be removed to aid brake cooling.
Its the piece in the top photo which if you cut out the small piece marked would then match the second picture.
Thanks everyone - and yes, on mine it does look like there's a bit of extra plastic showing, And if @Popsdosh is right, it maybe should have been pushed off before fitting to make the gap larger for brake cooling.
But then @bammy says theirs looks identical to mine... Really, with this extra piece showing on one side only?
Highlighted below:
[/img]
MY23.5 D5 3.0 MHEV Metropolitan Edition – Santorini Black – Ebony Windsor Leather – 21” Style 5025 gloss black wheels – 21” full size spare tyre – Black roof rails – Black side mouldings - Williams Ceramic Coat. [Gone: D5 HSE @ 50,795miles: (now LH68 BYW)]
You cannot create new threads in this forum You cannot reply to threads in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum