Discovery 2017

↓ Advertise on DISCO5.CO.UK ↓

  • Flatcoat
    Member Since: 18 Apr 2017
    Location: Aboyne
    Posts: 32
    Scotland 
    2019 Discovery SDV6 HSE Lux Namib Orange

    Headlight Shut Lines

    Post washing the car this evening I noticed (for the first time) that my Headlights are not flush with the front bumper on the nearside and not flush with the wing on the offside....!!!

    Nearside:



    Offside:


    These are the only bits that are not flush and not the same on both sides.....!!!

    Anybody else have this...????
  • J77
    Member Since: 07 Jun 2016
    Location: Fife
    Posts: 1008
    Scotland 

    Never checked, I'm planning on washing mine tomorrow so will have a look.

    18MY Velar R-Dynamic SE D240 Fuji White
  • J77
    Member Since: 07 Jun 2016
    Location: Fife
    Posts: 1008
    Scotland 

    Looks like mines the same




    18MY Velar R-Dynamic SE D240 Fuji White
  • Russell
    Member Since: 26 Jun 2016
    Location: Lydd
    Posts: 1104
    United Kingdom 
    2017 Discovery Td6 First Edition Namib Orange

    And mine
    Off side rear fog light/reflector in the bumper doesn't sit completley flush

    Namib Orange 1st Edition with black roof and wheels.
    Privacy, tow bar, drive pack, surround camera, heated front & rear seats, auto dim door mirrors, side steps, remote Pro, RSE, arm rest fridge dash cam front and rear.
  • J77
    Member Since: 07 Jun 2016
    Location: Fife
    Posts: 1008
    Scotland 

    My rears don't sit flush either.

    Must be an Orange thing Laughing

    18MY Velar R-Dynamic SE D240 Fuji White
  • Flatcoat
    Member Since: 18 Apr 2017
    Location: Aboyne
    Posts: 32
    Scotland 
    2019 Discovery SDV6 HSE Lux Namib Orange

    Whilst at my local Land Rover Approved Bodyshop (to get pre-delivery scratches repaired......another story.....no saga) I asked about the headlight shut-lines.

    Apparently this can be sorted quiet easily under Warranty...!!! Very Happy

    The Approved Bodyshop put a claim in for me with Land Rover UK and will re-book my car in for the front bumper to be removed and the headlight/wing to be adjusted so all becomes flush....awesome.

    A case of trial and error with bumper on/off and headlight repositioning but all doable.

    Good luck with others Thumbs Up
  • Russell
    Member Since: 26 Jun 2016
    Location: Lydd
    Posts: 1104
    United Kingdom 
    2017 Discovery Td6 First Edition Namib Orange

    Trial and error leads to scratches and other damage, I don't think the head light flush fit is that major to risk all that work/damage

    Namib Orange 1st Edition with black roof and wheels.
    Privacy, tow bar, drive pack, surround camera, heated front & rear seats, auto dim door mirrors, side steps, remote Pro, RSE, arm rest fridge dash cam front and rear.
  • J77
    Member Since: 07 Jun 2016
    Location: Fife
    Posts: 1008
    Scotland 

    I checked mine over when I washed it, it only seems slightly out on the photo I posted the rest look flush.

    I'm not too concern about it at the moment, your car does look a lot worse than mine.

    18MY Velar R-Dynamic SE D240 Fuji White
  • Road Runner 2017
    Member Since: 14 Jan 2017
    Location: Scotland
    Posts: 2010
    Scotland 
    2018 Discovery Si6 HSE Lux Santorini Black

    Flatcoat wrote:
    Whilst at my local Land Rover Approved Bodyshop (to get pre-delivery scratches repaired......another story.....no saga) I asked about the headlight shut-lines.

    Apparently this can be sorted quiet easily under Warranty...!!! Very Happy

    The Approved Bodyshop put a claim in for me with Land Rover UK and will re-book my car in for the front bumper to be removed and the headlight/wing to be adjusted so all becomes flush....awesome.

    A case of trial and error with bumper on/off and headlight repositioning but all doable.

    Good luck with others Thumbs Up


    You would think all these checks would be carried out before the car left the factory.?? Must be costing LR a packet to get issues like these rectified. Not to mention the inconvenience caused to the customer.

    Bumper removal is a pet hate. Broken plastic lugs/clips and missing grommets. Bumpers never the same and never seems to sit flush like before removal and feels alot more looser ie more play and not as rigid like beforehand. Not to mention scratched paintwork from boilersuit zips etc Sad
  • winger
    Member Since: 19 Mar 2017
    Location: Somerset
    Posts: 205
    United Kingdom 
    2017 Discovery Td6 HSE Aintree Green

    SSM issued for this (VIN restricted)

    Reference
    SSM73332
    Models
    Discovery / L462
    Title
    L462 All New Discovery Head Lamp Poor Profile
    Category
    Body
    Last modified
    16-May-2017 00:00:00
    Symptom
    108000 Ext. Trim/Accessories
    Attachments
    L462 Poor headlamp profile.pdf
    Content
     Issue:
     
    Land Rover Discovery (L462) prior to the vin of LR008316, Customers or Retailers may report that the Headlamp Profile to the fender (Wing) or the Headlamp to Grille / Bumper profile is incorrect – see attached file for examples
     
    Cause:
     
    Concerns within the build process
     
    Action:
     
    Should a customer or retailer report that the profile of the Headlamp to the Grille / Bumper is incorrect then the Technician is requested to first loosen the 3  Headlamp fixings as shown in the attached file and then gentle push inwards on the headlamp until flush or within the standard of 2mm  + or – 1.7mm. If this fails to align the profile then please replace the affected headlamp mounting bracket
     
    Part Numbers
    LR086096 –Right Hand Bracket, Headlamp Mounting
    LR086097 – Left Hand Bracket, Headlamp Mounting
     
    Should a customer or retailer report the Headlamp profile to the Fender / Wing  then the Technician is requested to replace the affected Bumper Mounting Bracket
     
    Part Numbers
    LR104987 – Right Hand Bracket, Bumper Mounting
    LR104988 - Left Hand Bracket, Bumper Mounting
     
  • J77
    Member Since: 07 Jun 2016
    Location: Fife
    Posts: 1008
    Scotland 

    I'm in VIN range HA, so I assume my car is affected. I'll need to have a look over it.

    18MY Velar R-Dynamic SE D240 Fuji White
  • Martin
    Site Admin and Owner
    Member Since: 30 Mar 2016
    Location: Hook Norton
    Posts: 144
    United Kingdom 

    HA is the year and factory code (2017MY + Solihull).

    LR tech bulletins use a (non obvious) combination of the vehicle model ID (LR = D5, LA = D3/4, etc) and the last 6 numbers of the VIN (sequential build number).

    So check your last 6 numbers rather than any letters.

    06 D3 SE / 15 D90 XS SW / 88 90 Td5 / 68 BMW 2000 TI
  • J77
    Member Since: 07 Jun 2016
    Location: Fife
    Posts: 1008
    Scotland 

    👍🏻 I did wonder, looking back at past VIN numbers never seen an LR.

    Numerically my car isn't included, mines 009 range.

    18MY Velar R-Dynamic SE D240 Fuji White
  • winger
    Member Since: 19 Mar 2017
    Location: Somerset
    Posts: 205
    United Kingdom 
    2017 Discovery Td6 HSE Aintree Green

    Embarassed

    Sort of took a bit too much for granted it seems!

    If you VIN is lower than/less than/not more than 008316 (last six digits), take note.

    Otherwise naff off.
  • Teemo
    Member Since: 12 Feb 2017
    Location: Buxton
    Posts: 130
    United Kingdom 

    Mine is 14xxx and the profile is pretty good. Flush along the wing, maybe protruding by 1 mm at the grill


    Last edited by Teemo on 17th May 2017 8:12 pm. Edited 1 time in total
  • Forum Permissions
  • You cannot create new threads in this forum
    You cannot reply to threads in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot vote in polls in this forum
All times are GMT DISCO5.CO.UK © 2016 - 2024 Futuranet Ltd DISCO5.CO.UK RSS Feed - All Forums 
DISCO5.CO.UK is independent and not affiliated to Jaguar Land Rover.
Switch to the mobile site